View KSP2907A06_701011.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

KSP2907A PNP General Purpose Amplifier
September 2006
KSP2907A
PNP General Purpose Amplifier
Features
* Collector-Emitter Voltage: VCEO= 60V * Collector Power Dissipation: PC (max)=625mW * Suffix "-C" means a Center Collector (1.Emitter 2.Collector 3.Base) * Non suffix "-C" means a Side Collector (1.Emitter 2.Base 3.Collector) * Available as PN2907A KSP2907A
1 23
tm
TO-92
: 1. Emitter 2. Base
3. Collector
KSP2907AC : 1. Emitter 2. Collector 3. Base
Absolute Maximum Ratings * T
Symbol
VCBO VCEO VEBO IC TJ Tstg Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector current Junction Temperature Storage Temperature
a
= 25C unless otherwise noted
Parameter
Value
-60 -60 -5 -600 +150 -55 ~ +150
Units
V V V mA C C
* 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics T =25C unless otherwise noted
a
Symbol
PC RJC RJA
Parameter
Collector Power Dissipation, by RJA Thermal Resistance, Junction to Case(note1) Thermal Resistance, Junction to Ambient(note2)
Max
625 83.3 200
Units
mW C/W C/W
Note1. Infinite heat sink. Note2. Minimum Land pad size.
Electrical Characteristics * T
Symbol
V(BR)CBO V(BR)CEO V(BR)EBO ICBO hFE
a
= 25C unless otherwise noted
Parameter
Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current DC Current Gain
Test Condition
IC = -10A, IE = 0 IC = -10mA, IB = 0 IE = -10A, IC = 0 VCB = -50V, IE = 0 VCE = -10V, IC = -0.1mA, VCE = -10V, IC = -1mA, VCE = -10V, IC = -10mA, VCE = -10V, IC = -150mA, VCE = -10V, IC = -500mA, IC = -150mA, IB = -15mA IC = -500mA, IB = -50mA IC = -150mA, IB = -15mA IC = -500mA, IB = -50mA VCB = -10V, IE = 0, f = 1.0MHz IC = -50mA, VCE = -20V, f = 100MHz VCC= -30V, IC = -150mA, IB1= -15mA VCC= -6V, IC = -150mA,IB1= IB1 = -15mA
Min.
-60 -60 -5.0
Typ.
Max. Units
V V V nA
-10 75 100 100 100 50
300 -0.4 -1.6 -1.3 -2.6 8 V V V V pF MHz ns ns
VCE(sat) VBE(sat) Cobo fT tON tOFF
Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Output Capacitance Current Gain Bandwidth Product Turn On Time Turn Off Time
200 45 100
* DC Item are tested by Pulse Test: Pulse Width300us, Duty Cycle2%
(c)2006 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
KSP2907A Rev. E
KSP2907A PNP General Purpose Amplifier
Package Marking and Ordering Information
Device(note)
KSP2907ABU KSP2907ACBU KSP2907ATA KSP2907ACTA KSP2907ATF
Device Marking
KSP2907A KSP2907AC KSP2907A KSP2907AC KSP2907A
Package
TO-92 TO-92 TO-92 TO-92 TO-92
Packing Method
BULK BULK TAPE & AMMO TAPE & AMMO TAPE & REEL
Qty(pcs)
--2,000 2,000 2,000
Pin Definitions
1.Emitter 2.Base 3.Collector 1.Emitter 2.Collector 3.Base 1.Emitter 2.Base 3.Collector 1.Emitter 2.Collector 3.Base 1.Emitter 2.Base 3.Collector
Note : Affix "-C-" - center collector pin. Suffix "-BU" - Bulk packing, straight lead form.(see package dimensions) Suffix "-TF" - Tape& Reel packing, 0.200 In-Line Spacing lead form. (see package dimensions) SUffix "-TA" - Tape& AMMO packing, 0.200 In-Line Spacing lead form. (see package dimensions)
2 KSP2907A Rev. E
www.fairchildsemi.com
KSP2907A PNP General Purpose Amplifier
Typical Characteristics
VBE(sat), VCE(sat)[V], SATURATION VOLTAGE
-10
1000
VCE = -10V
IC = 10 IB
hFE, DC CURRENT GAIN
-1
VBE(sat)
100
-0.1
VCE(sat)
-0.01 -1 -10 -100 -1000
10 -1 -10 -100 -1000
IC[A], COLLECTOR CURRENT
IC[mA], COLLECTOR CURRENT
Figure 1. DC current Gain
Figure 2. Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage
100
1000
IE = 0 f = 1MHz
fT[MHz], CURRENT GAIN BANDWIDTH PRODUCT
VCE = -20V
Cob [pF], CAPACITANCE
10
100
1
0.1 -1 -10 -100
10
-1
-10
-100
-1000
VCB [V], COLLECTOR-BASE VOLTAGE
IC[mA], COLLECTOR CURRENT
Figure 3. Output Capacitance
Figure 4. Current Gain Bandwidth Product
3 KSP2907A Rev. E
www.fairchildsemi.com
KSP2907A PNP General Purpose Amplifier
Package Dimensions TO-92 Straight Lead Form
4.58 -0.15
+0.25
14.47 0.40
0.46 0.10
4.58 0.20
1.27TYP [1.27 0.20] 3.60 0.20
3.86MAX
1.27TYP [1.27 0.20]
0.38 -0.05
+0.10
1.02 0.10
0.38 -0.05
+0.10
(R2.29)
(0.25)
Dimensions in Millimeters
Dimensions in Millime
TO-92 0.200 In-Line Spacing Lead Form
Dimensions in Inches[Millimeters]
4 KSP2907A Rev. E
www.fairchildsemi.com
KSP2907A PNP General Purpose Amplifier KSP2907A PNP General Purpose Amplifier
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FAST(R) FASTrTM FPSTM FRFETTM
FACT Quiet SeriesTM GlobalOptoisolatorTM GTOTM HiSeCTM I2CTM i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM
OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM
SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyBoostTM TinyBuckTM TinyPWMTM TinyPowerTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM
UltraFET(R) UniFETTM VCXTM WireTM
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification
Advance Information
Product Status
Formative or In Design
Definition
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I20
5 KSP2907A Rev. E
www.fairchildsemi.com

▲Up To Search▲

Price & Availability of KSP2907A06

	To Download KSP2907A06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .